Parameters

Composition and traits:

LM-8 glacial refrigerant is composed of modified organic acid salt solution. The main additives include anti-corrosion agent, anti-mold agent, solubilizer, stabilizer, etc. Appearance is light-colored liquid. At 20 ℃, the density is 1.334 ～ 1.360g / cm3, the specific heat is 0.622cal / g · ℃, the viscosity is 2.9mPa · s (cP), and the thermal conductivity is 0.47W / m · K. Boiling point is higher than 110 ℃, freezing point is lower than -60 ℃, no flash point, non-volatile, non-flammable, low toxicity.

Purpose and usage:

LM-8 glacial refrigerant has the advantages of safety, low toxicity, non-volatile, non-flammable, large specific heat, high thermal conductivity, high cooling capacity, good anti-rust performance and so on. It can be used as a coolant in the temperature range of -50 ℃ ～ 100 ℃ instead of the traditional calcium chloride aqueous solution.

Before use, the system needs to be cleaned, and then directly add LM-8 refrigerant, and it is forbidden to use it with other refrigerants. After normal use, check the pH value every 3 months. If the pH value is lower than the specified value, you should contact us in time for adjustment.